The Sciologness.com™ agent utility uses data collection technology to conveniently update multiple PC drivers. Drivers are the property and the responsibility of their respective manufacturers, and may also be available for free directly from manufacturers' websites. Sciologness.com is not responsible in any way for the performance of or issues caused by any third-party drivers.Drivers may also be available for free directly from manufacturers' websites. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Any other third-party products, brands or trademarks listed above are the sole property of their respective owner. No affiliation or endorsement is intended or implied.
Dell PowerVault 122T SDLT 320 (Autoloader) Drivers Download This site maintains the list of Dells Drivers available for Download. Just browse our organized database and find a driver that fits your needs. If you has any Drivers Problem, Just, this professional drivers tool will help you fix the driver problem for Windows 10, 8, 7, Vista and XP.
Here is the list of Dell PowerVault 122T SDLT 320 (Autoloader) Drivers we have for you. To Download Dell PowerVault 122T SDLT 320 (Autoloader) Drivers you should Download Our Driver Software of. Then you can download and update drivers automatic. Just Download and Do a free scan for your computer now.
Compaq SDLT320 (160/320 GB) Drive driver is a windows driver. Common questions for Compaq SDLT320 (160/320 GB) Drive driver Q: Where can I download the Compaq SDLT320 (160/320 GB) Drive driver's driver? Please download it from your system manufacturer's website. Or you download it from our website. Q: Why my Compaq SDLT320 (160/320 GB) Drive driver doesn't work after I install the new driver? Please identify the driver version that you download is match to your OS platform. You should uninstall original driver before install the downloaded one.
Try a driver checking tool such as. As there are many drivers having the same name, we suggest you to try the Driver Tool, otherwise you can try one by on the list of available driver below. Please scroll down to find a latest utilities and drivers for your Compaq SDLT320 (160/320 GB) Drive driver. Be attentive to download software for your operating system. If none of these helps, you can for further assistance.
Super DLTtape I (SDLT1) is the next generation DLT tape platform. Built upon the proven success of the DLT tape system, the defacto industry standard for mid-range computing backup and archive applications. The Super DLTtape I cartridge has a native capacity of 110 GB on a SDLT 220 Drive, 160 GB on a SDLT 320 and a native transfer rate of greater than 10 MB/second. Ultra-high capacity, high transfer speeds. Features:.
Capacity: 110GB (native) / 220GB (compressed) on a SDLT 220 Drive. Capacity: 160GB (native) / 320GB (compressed) on a SDLT 320 Drive. Transfer speed: 16MB/sec (max. Native) / 32 MB/sec (max. Compressed). Transfer rate of greater than 10 MB/second.
30 year archival life. 1,000,000 head pass durability Related Products.
The HP StorageWorks SDLT 600 tape drive is a high-capacity, high-performance streaming tape drive. It is installed into a spare drive bay in your server. Before starting to install your tape drive, you should consider the following. Which operating systems are supported? HP StorageWorks SDLT 600 drives can be connected to servers running under Windows, NetWare, UNIX, Tru64, OpenVMS and Linux. Refer to the “HP StorageWorks Tape Software Compatibility” topic on our World Wide Web site ( ) for more information about the operating system versions that are supported. How do I the connect the tape drive to my server’s SCSI bus?
Your tape drive is attached to the SCSI bus of the host server via a spare connection on the internal SCSI ribbon cable (supplied with the drive). The cable must be terminated,. Y ou will need a properly installed and configured SCSI host bus adapter (HBA) or a built-in SCSI controller on your server. For optimum performance your tape drive should be connected to an Ultra 3 (160) or Ultra 4 (320) host bus adapter or SCSI controller using a correctly terminated, LVDS-compatible ribbon cable with a spare 68-pin, high-density (HD), wide SCSI connector. We strongly recommend that you use the SCSI ribbon cable supplied with the drive,.
We also recommend that the drive is the only device on the SCSI bus. Do not connect more than two tape drives per SCSI controller. Do not attach the drive to the same SCSI bus as your disk drive or to a RAID controller. Why is the SCSI bus type important? The SCSI bus type determines the speed at which data can be transferred between devices on the bus and the maximum length of cable that can be used.
HP StorageWorks SDLT 600 tape drives are high performance Ultra 3 SCSI devices with a maximum burst transfer speed of 160 MB/second. To benefit from this level of performance, it is important to ensure that the drives are connected to a SCSI bus of a similar or higher specification.
This means that you need:. An Ultra 3 (160) or Ultra 4 (320) SCSI bus.
Ultra 160 SCSI supports the maximum bus speed of 160 MB per second, Ultra 320 SCSI exceeds this. LVD-rated SCSI cabling and terminators. The LVD interface and cable supplied with the drive enable the data to be transferred at the drive's maximum rate and provide a maximum cable length of 12 meters.
NOTE: The drives are not compatible with high voltage differential (HVD) SCSI devices. How can I check the SCSI bus type?
For most operating systems you can install HP Library & Tape Tools, directly from the web site at www.hp.com/support/tapetools or from the link on the HP StorageWorks Tape CD-ROM, and run the “Install Check” to check your server’s current SCSI configuration. This will provide information about the SCSI bus and the SCSI IDs in use. What are the mounting requirements for the tape drive? Mounting bay. 0.7 A Mounting hardware For many servers, no mounting tray or rails are required.
Devices simply slide into the server’s chassis and are fixed with screws. Other servers have built-in trays or rails. Rail kits for a number of industry-standard servers may be available.
For more details refer to:. Some servers use non-standard mounting rails and do not include spares. If this is the case with your system, you will have to order these accessories from the server manufacturer before you can install the tape drive.
Air flow requirements The internal tape drive requires adequate air flow to dissipate the heat resulting from continuous drive operation. Specifically, the air flow must be sufficient to keep the tape path temperature below 50° C ambient operation.
Always operate the tape drive within an ambient air temperature of no more than 40° C. It is important to keep the cooling holes in the rear and the grill in the front of the tape drive clear of any obstructions that may hinder the air flow and to ensure that all fans in your server are in place and operational.
Make sure that empty bays have the appropriate blanking plates installed so that airflow is maintained. Do I need additional items for installation? You may need mounting hardware. See “What are the mounting requirements for the tape drive?” above. For optimum performance it is important to use a backup application that is appropriate for your system’s configuration. In a direct attach environment, where the tape drive is attached to a standalone server, you can use backup software that is designed for a single server environment.
In network configurations you will need backup software that supports enterprise environments. HP, Veritas, Legato, Yosemite and Computer Associates all provide suitable products. Further details about these and other products that may be appropriate can be found on our connectivity web site. Go to our connectivity web site: and select tape backup. Select software compatibility.
Select your combination of operating system and tape drive model in the table. A list of supported backup applications is displayed.
This will also tell you whether your configuration is compatible with HP One-Button Disaster Recovery, HP OBDR. (All HP StorageWorks SDLT 600 tape drives support HP OBDR.
However, you can only use this feature. If your system configuration and backup application also support it. Make sure you have a backup application that supports HP StorageWorks SDLT 600 tape drives and download any upgrades or patches, if required. NOTE: We recommend that you install drivers from the CD-ROM rather than the Windows Hardware Installation Wizard, as you can also use software on the CD-ROM to verify that your installation is correct. If you do not have internet access, you can also download drivers directly from the HP StorageWorks Tape CD-ROM, but these may not be the latest versions available. UNIX and OpenVMS users The recommended backup applications use the operating system’s standard, built-in device drivers. To upgrade drivers we recommend that you patch to the latest version of the operating system, following the instructions in the patch documentation.You will also find information about configuring device files in the Configuration Guides on the CD-ROM.
IA64 users If you are installing on IA64 system, such as an HP Integrity server, check for the latest information on the availability of backup application upgrades and drivers. 1 - SCSI ribbon cable 2 - 68-pin internal LVD/SE connector (use this connector) 3 - 68-pin internal SE connector (Do Not use this connector) 4 - 50-pin internal SE connector (Do Not use this connector) 5 - SCSI HBA 6 - SCSI ribbon cable 7 - Tape drive Use the following questions to help you check your SCSI connection. As long as you have a spare drive bay in your server you should have a spare connection on the internal SCSI bus. You need to ensure it is the correct SCSI bus type. Most users can use HP Library & Tape Tools to check the SCSI bus type.
If you answer ‘Yes’ to all these questions, you are ready to install your tape drive. If you answer ‘No’, you will probably need to purchase and install additional items. For product details, go to. Is there a spare SCSI port on the server’s internal SCSI bus? Yes Go to step b. No Purchase and install one of the recommended HBAs into an unused 64-bit PCI expansion slot.
(The HBA can also be installed in a 32-bit PCI expansion slot, but performance may be degraded.) No?. Are the SCSI ribbon cable and HBA card rated at Ultra 3 (160) or Ultra 4 (320)? (Make sure the ribbon cable is terminated.) Yes Go to step c.
![]()
No Performance may be impaired. See table below. Consider replacing your card with one of the recommended HBAs. We recommend a 64-bit Ultra 3 (160) SCSI HBA kit. Will the drive be the only device on the bus?
Yes You are ready to install the drive. No This is the recommended configuration. Do not connect to a RAID controller channel.
Consider installing (if you have a spare PCI slot) or replacing your card with an Ultra 4 (320) HBA. NOTE: Your HP StorageWorks SDLT 600 drive is shipped with a default SCSI ID of 6, but it can be assigned any unused ID between 0 and 15. Do not use SCSI ID 7, which is reserved for the SCSI controller.SCSI ID 0 is typically assigned to the boot disk and should also not be used unless the tape drive is on a dedicated SCSI bus.
Determine whether you need to change the SCSI ID from the default of 6. For example, in multi-initiator parallel SCSI environments (such as ProLiant clusters) it is possible that the initiator devices will use IDs 6 and 7. In this case, you will need to change the tape drive’s SCSI ID.
For most operating systems you can install HP Library & Tape Tools from the link on the HP StorageWorks Tape CD-ROM and run the “Install Check” to check your server’s current SCSI configuration. This will provide information about the SCSI bus and the SCSI IDs in use. CAUTION: Static electricity can damage electronic components.
Always wear an antistatic wriststrap if possible. If not, to equalize the electromagnetic charges, touch a bare metal part of the server (such as the back plate) before you remove the tape drive from its bag. Change the tape drive’s SCSI ID, if necessary. The SCSI ID is set using jumpers on a set of pins at the rear of the drive. Use tweezers or small pliers to move the jumpers to the pattern corresponding to the ID you want, see Figure 2. If you do not install any jumpers, the firmware makes the drive default to SCSI ID 6.
If you do install jumpers, the left-hand jumper (NC) should always be set. Spare jumpers are provided with the drive. CAUTION: Static electricity can damage electronic components. Always wear an antistatic wriststrap if one is available. If not, after you have disconnected power from the server and removed the cover, touch a bare metal part of the chassis.
Similarly, touch a bare metal part of the drive before installing it. Assemble the necessary tools and materials: Phillips screwdriver Flat-bladed screwdriver (if your server uses slotted screws) Torx screwdriver (if your server uses torx screws) Your server manuals (for reference during installation). Perform a normal system shutdown and turn off the server and any connected peripherals. Remove the cover and front panel from the server, as detailed in your server’s documentation. As you work inside the server, you may have to disconnect the SCSI cable or power cable from other devices to maneuver the new drive into place. If you have to do this, make a note of their position and connections so you can put them back correctly later.
NOTE: The internal tape drive requires adequate air flow to dissipate the heat resulting from continuous drive operation. It is important to keep the cooling holes in the rear and the grill in the front of the tape drive clear of any obstructions that may hinder the air flow and to ensure that all fans in your server are in place and operational. Make sure that empty bays have the appropriate blanking plates installed so that airflow is maintained. Attach mounting hardware If your server requires special rails or other hardware to install the tape drive, mount them on the tape drive in this step. If your server does not require special mounting hardware, proceed to “Step 5: Install the drive” now. For example, HP AlphaServers do not require special mounting hardware. HP ProLiant servers - Different models of server require different mounting methods.
The server may also incorporate a locking mechanism to hold the tape drive in place. See “Step 7: Secure the drive”. Please check your HP ProLiant server documentation to ascertain the correct method of mounting, and to check whether mounting hardware is provided with the server. Mounting rails - Some HP ProLiant servers, such as ML530 and ML570, require mounting rails. These may be metal or plastic rails attached to the server's drive bay filler panel.
Use a regular Phillips screwdriver to attach the appropriate rails. Use the M3 screws provided with the tape drive. For ML530 servers position the screws in the right-hand holes on the tape drive (holes 1 and 3), as shown in Figure 4, Callout 2 and Callout 3.
For ML570 servers position the screws in the left-hand holes on the tape drive (holes 2 and 4), as shown in Figure 4, Callout 5 and Callout 6. 1 - Rail position for mounting in an HP Proliant ML530 server 2 - Hole position 1 3 - Hole position 3 4 - Rail position for mounting in an HP Proliant ML570 server 5 - Hole position 2 6 - Hole position 4 7 - Position for mounting screws when mounting in an HP Proliant ML350 or ML370 server 8 - M3 mounting screw for the ML350 9 - M3 offset screw for mounting in a ML370 Mounting screws Other HP ProLiant server models, such as ML350 and ML370, only require the use of special locating screws with no mounting rail. Use a T8 Torx screwdriver to attach the appropriate screws.
You may need to purchase the M3 screws separately. Position the screws in the right-hand holes on the tape drive (holes 1 and 3), as shown in Figure 4, Callout 2 and Callout 3.
Free online lego digital designer. Lego Digital Designer which is on its version 4.3.5. Lego is the creator of this app for Mac or higher.
![]()
HP ProLiant ML350: Use M3 mounting screws. These have a thicker head than the standard M3 screws (Figure 4, Callout 8). HP ProLiant ML370: Use M3 offset mounting screws.
These have a thick offset piece and a thicker head than the standard M3 screws (Figure 4, Callout 9). Other servers Attach the appropriate mounting hardware. Refer to the manufacturer’s documentation for instructions. Install the drive. NOTE: Orientation - The internal tape drive may be installed top side up, left side down or right side down. Do not install it upside down.
Check your server documentation to check what orientations it supports. Attach power and SCSI cables To support the high performance of the tape drive it is important to use a suitably-rated SCSI cable. We recommend that you use the ribbon cable supplied with the tape drive.
This supports up to Ultra 4 (320) bus speeds. Attach a spare power cable from the server's internal power supply to the power connector, as shown in Figure 5, Callout 1. Attach the SCSI ribbon cable supplied with the tape drive to the SCSI host bus adapter or controller. Attach a spare connector on the server or HBA’s SCSI ribbon cable to the SCSI connector of the drive, as shown in Figure 5, Callout 2. NOTE: Termination must be present at two and ONLY two positions on the SCSI bus—at the beginning of the SCSI bus and at the end of the SCSI bus. Termination is normally enabled by default on the HBA and most internal SCSI cables have a terminator attached.
This will usually be a small, rectangular block of plastic attached to the cable end and marked 'SCSI Terminator'. Therefore, assuming the HBA is the first device on the bus, you should check that the second terminator is placed after the last device, as shown in Figure 5, Callout 2. Secure the drive The server latches and side views of your server model may not be exactly the same as shown in the illustrations. Please refer also to you server documentation. Mounting hardware used (HP ProLiant) Ensure that you use the correct mounting rails or locating screws, as described in “Step 4: Attach mounting hardware”.
Compaq Sdlt 320 Driver For Mac
The server also incorporates a locking mechanism to hold the tape drive in place. Push the tape drive firmly into the bay and make sure the server latch is locked in position, as shown in Figure 6. Replace the cover on the server. 1 - Screws go through holes 1 and 3 of the tape drive (see Figure 4, Callouts 2 and 3) 2 - Use M3 screws. Install drivers and verify installation Check operation. Switch on the server.
The tape drive will run its hardware self-test, which takes between 10 to 15 seconds. If self-test passes, the middle LED remains on and the other two LEDs are off. If the test fails, the middle and right LEDs remain on and the left LED flashes.
This continues until the drive is reset. See for more information.
Install drivers and backup software. For all operating systems ensure that you have downloaded drivers and any upgrades necessary for your backup application (see ). On Windows systems the Windows Hardware Installation wizard is displayed automatically. We recommend that you close the wizard and install the drivers from the link on the HP StorageWorks Tape CD-ROM. Verify that the tape drive installation was successful. For most operating systems use HP Library & Tape Tools on the HP StorageWorks Tape CD-ROM.
For UNIX systems, the UNIX Configuration Guide on the HP StorageWorks Tape CD-ROM includes a verification procedure. If you encounter a problem during this verification procedure, see for help in diagnosing and fixing the problem. You are now ready to carry out a backup and restore test to check that the drive can write data to tape. Refer to your backup application documentation for specific instructions. Use the blank cartridge supplied with the tape drive. Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc.
May have older product names and model numbers that differ from current models.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |